武邑凯美特特种金属粉末有限公司

武邑凯美特公司与中国有色金属研究总院合作，投资3800万元人民币组建钛粉生产线，于1993年9月份正式投产。生产方法：采用HDH方法，以海绵钛为原料，年产高纯钛粉600吨，低杂质低气体是我们产品的特征，高品质钛粉的生产能力及产量均居全国首位。主要设备：H718型氢气净化装置2台；QTM氢化炉4台；TTM脱氢炉26台。
公司拥有先进的生产技术工艺和设备，质量体系健全。其中，检测设备先进，如美国力可公司生产的TCH-600型氮氢氧， CS-230型碳硫检测仪器， ASTME-11试验筛。数十年公司生产的高品位钛粉主要出口美国，德国，日本等国家，一直以来得到了用户的好评。
2001年公司增加投资1200万人民币，组建钛粉、不锈钢粉、蒙耐尔、粉末冶金多孔过滤元件生产线。
主要设备：
LDJ 320-1500-300YS 型 冷等静压机
LDJ 200-1000-300YS型 冷等静压机
ZLS-800型 高真空烧结炉
ZS-1000型 高真空烧结炉
Y32-1000型 四柱液压机
年生产多孔过滤管及元件4万件，产品主要用于医药、制酒、饮料、淡水、海水淡化、石油及化工过滤行业。

2008年9月份增加投资7000万人民币，新建钛合金精密铸造生产线。

主要设备：
1000kg 真空自耗电极电弧熔炼炉
150 kg 真空自耗电极电弧凝壳炉
100kg 真空感应熔铸炉
2000tons 油压机
主要产品：
汽车增压器、汽车增压器钛合金叶轮、钛铝合金涡轮、高尔夫球头、钛合金人骨关节、汽车增压涡轮、耐热合金涡轮、发动机钛合金连杆、钛合金锭等产品。钛合金精密铸件年产200吨，年产耐热合金铸件100吨，钛合金棒材、钛合金锭500吨。
公司已通过ISO9001国际质量体系认证。
凯美特公司将会永久以优质的产品与优等的信誉服务于用户。

Kimet cooperated with Beijing General Research Institute of Nonferrous Metals (GRINM), through co-establishing a titanium powder production line with an investment of 38 million RMB, which was put into production on September 1993.

Production method: HDH;

Raw material: Titanium Sponge;

Annual production of highly pure titanium powder: 600 tons;

Products characteristics: Low impurity and low gas content.

Both production capacity and output of high-quality titanium powder rank the first in China.

Main equipment:one set of HQCL-50 type hydrogenprodution line;

two sets of H718-type hydrogen purification equipments;

Four sets of QTM hydrogen furnaces;

26 sets of TTM hydrogen-degassing furnace;

With a complete and sound Quality System, Kimet is equipped with advanced production technology and equipment. We’ve such advanced testing equipment for TCH-600-typenitrogen hydroxide and CS-230 carbon and sulfur, as well as ASTME-11 test sieves, produced by LECO CORP., USA. For decades, high-quality titanium powder produced by Kimet has been exportedto the United States, Germany, Japan, etc, where the products are well received.

In 2001, Kimet increased an investment of 12 million RMB, building up production lines for titanium powder, stainless steel powder, Monel, powder metallurgy porous filter elements.

Main equipment:

LDJ 320-1500-300YS Cold Isostatic Press

LDJ 200-1000-300YS Cold Isostatic Press

ZLS-800 High vacuum sintering furnace

ZS-1000 High vacuum sintering furnace

Y32-1000 type four-pillars hydraulic press

The annual production of porous filter tubes and components amounts to 40,000 pieces, most of which are used in such fields as pharmacy, liquor manufacturing, beverage, fresh water, and sea water desalination, as well as petroleum and chemical filtration industry.

In order to set up a new production line for titanium alloy powder precision casting,

Kimet Corporation increased an investment of 70 million RMB in September 2008.

Main melting-castings equipments:

1000kgVacuum arc melting furnace

150kgVacuum arc skull furnace

100kgVacuum induction melting casting furnace

2000tonsOil hydraulic press

Main productions:

Automobile Pressure Booster, titanium alloy impeller of Automobile Pressure Booster, titanium aluminum alloy worm wheel, golf club head, titanium alloy artificial joint, automobile Turbo-Charger, heat-resisting alloy turbo, titanium alloy Engine Connecting Rod, Ti alloy ingotsetc. Annual production of titanium alloy powder precision casting, heat-resisting alloy, and titanium alloy bars & Ti alloy ingots are respectively 200 tons, 100 tons, and 500 tons.

Kimet has already had ISO9001 international quality system certification.

Kimet (WuYi ) Special Metal Powder Co.,Ltd will always keep customers in mind with the best credibility, high-quality products, and sound services.

15